|
|
|
|
Road Lighting
General Description
Road lighting luminaire suitable for use with Low Pressure Sodium Vapour SOX 35W lamps.
Features
- Housing made of die-cast aluminium, MBV treated for corrosion resistance
- The housing accommodates the electrical accessories like ballast, power factor improvement capacitor, ignitor, all pre-wired up to a porcelain connector block. Two earthing terminals are provided on the housing, one inside and one outside. A cable clamping arrangement is also provided
- Reflector plate made of M.S. stove enamelled white, is fixed to the housing by four screws. This plate accommodates the lampholder and a lamp support. To facilitate maintenance the plate can be kept captive with the housing by a pair of flexible wire lengths
- Felt gasket impregnated with insect and water repellent solution on the periphery of the housing
- A prismatic cover moulded from clear UV stabilised acrylic
- Stainless steel clips for fixing the cover to the housing
Applications
- Secondary roads
- Industrial areas
- Security
- Residential colony roads
Installation
Pole entry through U clamps suitable for pole diameter of maximum Ø40mm.
Compliances
|
Technical Data
| Type | For Lamp | Nominal Voltage (V) | Mains Current(A) | Nominal Power Factor | | XRP 51 | 1 x SOX 35W | 220/240 | 0.23 | 0.85 |
Ordering Data
| Type | Ordering No | Quantity Per Box | Dimensions (MM) | Net Weight (Kg) | Gross Weight (Kg.) | Volume (M3) | | XRP 51 Housing | 1310 12685 | 2 | 445 x 210 x 286 | 2.775 x 2 | 6.40 | 0.062 | | XRP 51 Cover | 1310 12635 | 8 | 480 x 355 x 425 | 0.50 x 8 | 5.00 | 0.062 |
|
| | |
|
|
